top of page
ET12000 HC crane.jpg

Standard equipment

Chassis

  • axel 4

  • wheel base approx. 5,95m

  • min. capacity of front 2 axels 9t

  • equipped with power take off (PTO) engine / gear

Subframe

  • made of high tensile steel

  • sandblasted, prime and top coated for maximum resistance against corrosion

  • fixed to the truck frame acc. to manufacturer ´s specification

  • complete strengthening of chassis

Tilting frame

  • tilting by 2 hydraulic cylinders

  • max tilting angle 15°

Support legs

  • back legs tilted back-wise

  • back angle 15°

  • max extension 350mm

  • made of high tensile steel in rectangular sections

  • independently and hydraulically operated

  • toothed spades for maximum grip

  • hanging hooks

  • cylinders with hydraulic locks

  • centre distance 1377mm

  • outer edge distance 1760mm

Underlift RTS - Rear towing system

  • 2 telescopic extensions, each 750mm

  • max working pressure 27,5 MPa

  • lifting capacity retracted 11,5t

  • lifting capacity extended 8,0t

  • tilting head 15° down for cross head positioning

  • 2 holders for guide pulley for rope positioning

  • mechanical locking device

  • fixing of towing bar

  • demountable back towing bar

  • 2 towing eyes

Platform

  • low profile 74mm height

  • length 5750mm

  • width 2540mm

  • smooth surface

  • anchoring eyes each 1m

  • side clamping hole each 250mm

  • towing bar – positioning – each 250mm

  • guide pulleys 2 pcs – positioning – each 1m

  • wheel holders

  • 2 drive up ramps with rollers, extension 1448mm

  • 4 rollers of platform

  • preparation for assembly of 2 winches – fixed and sliding

Winches

  • Sepson Sepdurance H60 fix, rope length 30m, rope diameter 14mm, 7,5° angle, towing ball ISO 50-X, bush against weather conditions, guide pulley

  • Sepson Sepdurance H60 sliding, rope length 30m, rope diameter 14mm, sliding 1000mm, towing ball ISO 50-X, bush against weather conditions, guide pulley

  • Sepson Sepdurance H120F on RTS, rope length 60m, rope diameter 16mm

  • Sepson Sepdurance H240, rope length 60m, rope diameter 24mm, guide pulley

Flyer

  • 2 boxes on sides of flyer

  • 1 big box from side of platform

Body panels

  • made of stainless steel thickness 3mm

  • hanging brackets

  • rubber mats thickness 23mm

  • anti-spray mudflaps (beside G chassis)

  • lights turn on automatic by PTO

  • compartments for hydraulic distributor

  • compartments with lockable doors with key, with rubber strip sealing

  • inside hinges made of stainless steel thickness 5mm

  • adjustable stopper for angle of open doors

  • easy access to fuel tank and Ad Blue

  • storage boxes in floor 2 pcs.

Hydraulic system

  • oil tank 240l

  • hydraulic pump with connection to PTO

  • working pressure in hydraulic system 20-27,5MPa

  • oil flow 80l/min

  • proportional distributors 2pcs x 8 sections, with custom made hoses

  • floating position

  • manual central greasing

  • hydraulic oil cooler

  • 2 separate circuits with control nanometer for each circuit

Electricity

  • tailor made electrical box - ESSELTRONIC

  • remote control

  • working lights on winch, on flyer, on underlift

  • orange lights on sides of body panels

  • flashing lights in front 4pcs, on back 2pcs, on flyer 4pcs

  • light bar on the flyer

  • combined auto lights on flyer

  • control of lights from cabin, from the remote control, from the distributor

Optional equipment

Mechanics

Hydraulics

  • Air drums

Body panels

  • Central lock system

  • Heating

  • Inner painting

Electricity

  • Extra rotating beacons

  • Extra working lights

  • Extra flashing lights

  • Extra side lights

  • Radio control

  • Camera on flyer and on underlift

  • Light bar on a cabin

  • Telescopic light bar

bottom of page